Fixed Forced Gas Springs

Ameritool manufactures a wide variety of stainless steel fixed force, adjustable force gas springs and dampers. Ameritool gas springs and dampers are suitable for all purposes and have unlimited application possibilities.

 

View Fixed Forced Gas Springs Specifications In The Table Below

  • SKU Rod Diameter Body Diameter Stroke Compressed Length Extended Length Metric Size Male Thread Size Metric Min-Max Lifting Force
  • 625-2 0.250 0.625 2.25 5.25 7.5 6 x 15 M 6 x 1 5-90
  • 625-3 0.25 0.625 3 7 10 6 x 15 M 6 x 1 5-90
  • 625-4 0.25 0.625 4 8 12 6 x 15 M 6 x 1 5-90
  • 625-6 0.25 0.625 6 9 15 6 x 15 M 6 x 1 5-90
  • 625-6L 0.25 0.625 7 10 17 6 x 15 M 6 x 1 5-90
  • 625-7 0.25 0.625 7.5 11.25 18.5 6 x 15 M 6 x 1 5-90
  • 625-8 0.25 0.625 8 12 20 6 x 15 M 6 x 1 5-90
  • 750-2 0.312 0.75 2.25 5.25 7.5 8 x 18 M 6 x 1 10-150
  • 750-3 0.312 0.75 3 7 10 8 x 18 M 6 x 1 10-150
  • 750-4 0.312 0.75 4 8 12 8 x 18 M 6 x 1 10-150
  • 750-6 0.312 0.75 6 9 15 8 x 18 M 6 x 1 10-150
  • 750-6L 0.312 0.75 7 10 17 8 x 18 M 6 x 1 10-150
  • 750-7 0.312 0.75 7.25 11.25 18.5 8 x 18 M 6 x 1 10-150
  • 750-8 0.312 0.75 8 12 20 8 x 18 M 6 x 1 10-150
  • 750-10S 0.312 0.75 9.6 13.4 23 8 x 18 M 6 x 1 10-150
  • 750-10 0.312 0.75 11 15 26 8 x 18 M 6 x 1 10-150

Notes:

  1. Force increments of 5 pounds.
  2. Product length tolerance is ± .08 in. (2.0 mm).
  3. Force tolerance is +3-8 lbs over the nominal force.
  4. Maximum piston speed is approximately 12 in. /sec. (.3 m/sec). Fast operation rates lead to excessive heat build-up resulting in internal seal damage.
  5. Gas springs are under pressure. Please dispose of properly. Do not puncture or open.
  6. Contact Ameritool for modified standards or for engineered specials to meet your exact needs.